Exit code 4

These error codes are returned by the Windows Installer functions MsiExec.

exit code 4

Note that any error in Winerror. If you are a user experiencing difficulty with your computer either during or after installing or uninstalling an application, you should contact customer support for the software you are trying to install or remove. If you feel you are in need of support for a Microsoft product, please go to our technical support site at support. Skip to main content. Contents Exit focus mode. Note If you are a user experiencing difficulty with your computer either during or after installing or uninstalling an application, you should contact customer support for the software you are trying to install or remove.

exit code 4

Is this page helpful? Yes No. Any additional feedback? Skip Submit. This value is returned when a custom action attempts to call a function that cannot be called from custom actions. Available beginning with Windows Installer version 3. If Windows Installer determines a product may be incompatible with the current operating system, it displays a dialog box informing the user and asking whether to try to install anyway.

This error code is returned if the user chooses not to try the installation. The Windows Installer service could not be accessed. Contact your support personnel to verify that the Windows Installer service is properly registered. The installation source for this product is not available.

Verify that the source exists and that you can access it. This installation package cannot be installed by the Windows Installer service. You must install a Windows service pack that contains a newer version of the Windows Installer service. Another installation is already in progress.

Complete that installation before proceeding with this install.

exit code 4

This installation package could not be opened. Verify that the package exists and is accessible, or contact the application vendor to verify that this is a valid Windows Installer package.Process execution failed with exit code 4. Click here for help Clicking the link results in thie below:. You've found an error that doesn't have an article written about it. Don't worry though, help is still available.

The forums are the best place to start. The name was not found. Import-Module Servermanager. This site uses cookies for analytics, personalized content and ads. By continuing to browse this site, you agree to this use. Learn more. Office Office Exchange Server. Not an IT pro? Resources for IT Professionals. Sign in. United States English. Ask a question. Quick access.

Search related threads. Remove From My Forums. Answered by:. Previous Versions of Exchange. Exchange Server This forum provides a place for you to discuss the Exchange You are welcome to come and post questions and comments about your experience with this software.

Sign in to vote. Click here for help Clicking the link results in thie below: Topic Last Modified: You've found an error that doesn't have an article written about it. Thanks in advance!!!Benjamin Cane.

Posts Projects Talks Feed. Understanding Exit Codes and how to use them in bash scripts Benjamin Cane. Lately I've been working on a lot of automation and monitoring projects, a big part of these projects are taking existing scripts and modifying them to be useful for automation and monitoring tools. One thing I have noticed is sometimes scripts use exit codes and sometimes they don't. It seems like exit codes are easy for poeple to forget, but they are an incredibly important part of any script.

Especially if that script is used for the command line. What are exit codes? On Unix and Linux systems, programs can pass a value to their parent process while terminating. This value is referred to as an exit code or exit status. On POSIX systems the standard convention is for the program to pass 0 for successful executions and 1 or higher for failed executions. Why is this important? If you look at exit codes in the context of scripts written to be used for the command line the answer is very simple.

Any script that is useful in some fashion will inevitably be either used in another script, or wrapped with a bash one liner. This becomes especially true if the script is used with automation tools like SaltStack or monitoring tools like Nagios, these programs will execute scripts and check the status code to determine whether that script was successful or not.

On top of those reasons, exit codes exist within your scripts even if you don't define them. By not defining proper exit codes you could be falsely reporting successful executions which can cause issues depending on what the script does. What happens if I don't specify an exit code In Linux any script run from the command line has an exit code.

With Bash scripts, if the exit code is not specified in the script itself the exit code used will be the exit code of the last command run. To help explain exit codes a little better we are going to use a quick sample script. Sample Script:!

The process exit code was "4" while the expected was "0". End Error DTExec:

When we execute this script as a non-root user the touch command will fail, ideally since the touch command failed we would want the exit code of the script to indicate failure with an appropriate exit code. This variable will print the exit code of the last run command.

The sample script runs two commands touch and echosince we did not specify an exit code the script exits with the exit code of the last run command. In this case, the last run command is the echo command, which did execute successfully.Creative Cloud applications store information about the installation and launch process in log files. This document describes errors you may find in these logs, and provides solutions, where possible. Note: Quickly find a specific error code or message: Use your web browser's Find feature to quickly locate your error in this document.

For information on additional Creative Cloud install error codes, see Troubleshoot download and install errors and Download and install errors. For more information, see Troubleshoot install issues with log files Creative Cloud. Ensure that the installation of these two database files media. Run the Creative Cloud Cleaner Tool to remove old installations.

Temporary deployment file cannot be loaded. Ensure that the installer isn't corrupt media. Make a local copy of the installer, and then retry the installation. See "Base product not installed" and "updates failed" errors Creative Cloud. See Exit codes 30 and exit code 31 "low disk space" errors. Unable to compute checksum for the file. The file might not exist, or the admin doesn't have sufficient permissions. File deletion failure. It is either corrupt or has been deleted due to patching.

Please verify that the disk image is not corrupt. Cannot get security descriptor for registry key. Either the registry key doesn't exist, or the admin has insufficient permissions. Cannot get discretionary access control list DACL in a specified security descriptor. Either the admin doesn't have sufficient permissions, or the permissions are corrupted. Cannot add new access control list ACL in registry key.

Cannot set information in a discretionary access control list DACL.This information is intended for developers debugging system errors. For other errors, such as issues with Windows Update, there is a list of resources on the Error codes page. The following list describes system error codes errors 0 to They are returned by the GetLastError function when many functions fail.

Windows cannot find the network path. Verify that the network path is correct and the destination computer is not busy or turned off. If Windows still cannot find the network path, contact your network administrator. You were not connected because a duplicate name exists on the network.

If joining a domain, go to System in Control Panel to change the computer name and try again. If joining a workgroup, choose another workgroup name.

No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept.

An attempt was made to join or substitute a drive for which a directory on the drive is the target of a previous substitute. Check your computer's system information and then contact the software publisher. Access Denied. Before opening files in this location, you must first add the web site to your trusted sites list, browse to the web site, and select the option to login automatically.

Operation did not complete successfully because the file contains a virus or potentially unwanted software.

exit code 4

This file contains a virus or potentially unwanted software and cannot be opened. Due to the nature of this virus or potentially unwanted software, the file has been removed from this location. The security stream for the given volume is in an inconsistent state.

Adobe CC 2017 Installing Error and Solved

Skip to main content. Contents Exit focus mode. Is this page helpful? Yes No. Any additional feedback? Skip Submit.I'll have you mastering Unix shell scripting in no time. These can be used within a shell script to change the flow of execution depending on the success or failure of commands executed.

This was briefly introduced in Variables - Part II. Here we shall look in more detail in the available interpretations of exit codes.

Success is traditionally represented with exit 0 ; failure is normally indicated with a non-zero exit-code. This value can indicate different reasons for failure. For example, GNU grep returns 0 on success, 1 if no matches were found, and 2 for other errors syntax errors, non-existent input files, etc.

We shall look at three different methods for checking error status, and discuss the pros and cons of each approach. Firstly, the simple approach:! In this case, that is cut. It was fed an empty string, and did its job - returned the first field of its input, which just happened to be the empty string. So what do we do?

If we have an error here, grep will report it, not cut. Therefore, we have to test grep 's return code, not cut 's. That is the basic way which textbooks might show you, but it is far from being all there is to know about error-checking in shell scripts. This method may not be the most suitable to your particular command-sequence, or may be unmaintainable.

Below, we shall investigate two alternative approaches. As a second approach, we can tidy this somewhat by putting the test into a separate function, instead of littering the code with lots of 4-line tests:! Parameter 1 is the return code Para. By writing the test routine once. Perl programmers will recognise this as being similar to the die command in Perl. As a third approach, we shall look at a simpler and cruder method.

I tend to use this for building Linux kernels - simple automations which, if they go well, should just get on with it, but when things go wrong, tend to require the operator to do something intelligent ie, that which a script cannot do!

MsiExec.exe and InstMsi.exe Error Messages

To do this with if would involve:! These can be thrown together as above, or:! Look carefully at this; the construct is. Only one command can be in each part. It is also very difficult to maintain.

Therefore this construct is only recommended for simple sequencing of commands. In earlier versions, I had suggested that you can use a subshell to execute multiple commands depending on whether the cp command succeeded or failed:.

The return code of the subshell is the return code of the final command command3 in this example. That return code will affect the overall command. So the output of this script:. So if you need to execute multiple commands as a result of the status of some other condition, it is better and much clearer to use the standard ifthenelse syntax.

You can mail me with this form.More actions. I have a batch file that copies the contents of one folder and subfolders on a server, to another folder on another server. In Visual Studio, when I execute it, it runs fine. I went into Management Studio, made new job to this package. When I run it, it fails. History is. Error: The package execution failed.

The step failed. I have set security on the other server and the one the batch file is on for everyone to have full control, as a test. No help. Tim Mitchell. This is likely an issue with the return value of xcopy - the default success return value is 0 but it appears that xcopy is returning a nonzero value.

To resolve this, you'll need to consult the xcopy documentation or the inline help. If a 4 is the expected success result, you can specify this in the configuration of the Execute Process Task. Thank You Tim. I was able to figure out why it was not running.

The batch ran fine when I scheduled it to run in task scheduler. That was then I realized, the Job was using mapped drives and I had to change the drives to a UNC path as well as editing the project to change parameters. Then it ran successfully 3 out of the last four days. The days it didn't run, it returned the same error, but that was because the batch could not connect to the share.


Comments

Leave a Reply

Your email address will not be published. Required fields are marked *